blogul
Acasă /

blogul

/Operation direction of stone diamond saw blade

Operation direction of stone diamond saw blade

2019-12-25

1. The general principle of the diamond saw blade machine is that,

when the saw blade mounted on the spindle rotates and moves in a reciprocating straight line on the guide rail of the beam, the single-arm saw moves in a reciprocating straight line on the table. The saw blade cuts into kernel material to produce extrusion, grinding and cutting action to form the saw path.


2. The moving parts of the saw machine should be of sufficient precision, and the operation should be stable with low noise and vibration. If the saw blade is repeatedly impacted by vibration, it will lead to the breakage, falling off or very wear of the cutting head.

3. The main motor power of the saw machine is determined by the diameter of the saw blade and the stone material cut. For the empirical data, please see the following table:


Material blade diameter(mm) cutting speed


low power high power
marble
200-250
1.5 3.7
marble
300-400 5.2 9.0
marble
450-550 7.5 14.5
marble
600-650 9.0 18.9
marble
700-750 13.4 29.9
marble
800-900 16.7 37.3
marble
1000-1100 22.4 48.5
marble
1200-1300 29.9 59.7
marble
1400-1800 44.8 67.2
marble
1900-2200 48.5 74.6
granite 200-250 1.5 3.0
granite
300-400 3.7 7.5
granite
450-500 9.0 13.4
granite
600-650 13.4 14.9
granite
700-750 16.7 26.0
granite
800-900 18.7 29.9
granite
1000-1100 22.7 33.6
granite
1200-1300 29.9 44.8
granite
1400-1800 41.0 59.7
granite
1900-2200 44.8 67.2


4· the saw machine must be replaced with lubricating oil and oil after 4-6 months of operation.



5. Before starting the machine every day, check and add lubricating oil to the sliding and rotating parts such as lead screw, guide rod and guide rail, and often check the guide rail of apricot beam. No sundries shall be left on it


6. After each shift, the above parts shall be lubricated with oil.


7. Regularly check the connections of screws to prevent loosening, and regularly check whether the tightness of triangle belt is appropriate.


8. Regularly remove stone powder, rinse trolley and 1 site.


SANG DIAMOND TOOLS use good quality diamond powder,steel core,special formula to ensure our diamond saw blade cutting good.

More details please contact us.

[email protected].

WWW.SANGTOOLS.COM 0086-595-22699555


Send A Message

24/7 via fax, email or phone.

lăsați un mesaj solicitați un preț gratuit
24/7 via fax, email or phone.