How to install a diamond saw blade

☆ Installation guide:

1. Cleaning: clean the main shaft and flange of the saw , remove rust, grease, etc. All surfaces shall be wiped with fine gauze.

2. Deburring: if you drill the mounting hole on the saw blade, you need an Angle grinder and roving paper to grind the burring around the position hole.

3. Rotation direction: when the saw blade is installed on the saw machine, the rotation direction should be consistent with the arrow direction on the saw blade matrix, and the direction should be kept unchanged from the beginning to the end of use. Otherwise, the diamond on the saw blade is easy to fall off and reduce the lifespan.

4· flange: its main function is to position, clamp and transfer torque, to ensure that the saw blade is installed on the main shaft of any saw machine at the right position, and to make it have enough rigidity to reduce the swing vibration during cutting.

Tip: the inner hole of flange plate should be coaxially coordinated, and the diameter of flange plate should be consistent with the diameter of saw blade, generally about 1/3 of the diameter of equal square saw blade. In the case of ensuring the cutting size, the larger the better. The recommended size of flange plate is shown in the table below:

More details please contact us - diamond tools manufacturer

www.sangtools.com   [email protected]